GUZZLER
OWNER’S MANUAL PAGE
5
12-2018
GUZZLER OPERATION
Do not attempt to ride on or otherwise attach any type of rider platform to this
machine. Injury and property damage may occur.
Floor surface should be swept free of debris prior to use. Failure to properly clear
floor surface will damage the squeegee and clog the pump plate.
1.) Press down on the foot bar and lift on handle until chassis is locked down into the operating
position.
Do not press the foot pedal located on the right side of the foot bar.
2.) Push the machine a few feet forward until squeegee is laid out. A side to side motion will help
squeegee to lay out.
3.) A normal walking speed assures nominal performance. The faster you go, the better the machine
works. If the pump stops working, see
TROUBLESHOOTING
on pg 8. When foam escapes
through breather hole in lid, tank is full (35 gallons) and must be emptied. See
GUZZLER
CLEAN
UP
below.
4.) When completed, return the chassis to the transport position by stepping on the foot pedal
located on the right side of the foot bar. The 1/4 cup of liquid residue is easily mopped up.
If the floor is not being wiped dry, the squeegee may need adjustment. See
TROUBLESHOOTING
on
pg 8.
