4
ARZUM
5
ARZUM
• Do not allow children to use the blender without supervision.
• To prevent harming your appliance do not use extension cords that
supply insufficient current.
• Do not place your appliance over or near direct heat sources such as
hot gas, electric burner, or heating oven.
• Do not let cord hang over edge of a table or counter, or touch any
other appliances.
•
NEVER
immerse the main part of your mixer in water or any other
liquid. Immediately unplug your appliance after getting wet in any
manner.
•
ALWAYS
unplug your appliance from outlet when not in use, or before
putting in or taking out attachments, or before caring and cleaning.
• Do not operate the mixer with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner, such
as by dropping down, etc. Do not attempt to repair it by yourself. Call
immediately an
Arzum Authorized Service.
•
NEVER
attach to your appliance any attachments belonging to other
appliances.
• Avoid actions that may harm or damage the cord or plug of your mixer.
Do not carry your appliance by holding from the cord. To unplug, hold the
plug and do not pull by the cord.
• Do not operate the beating or kneading nozzles inside an empty
receptacle or outside the receptacle. Your appliance can be damaged.
• Avoid from touching any moving parts when in use. Do not keep your
hands, hairs, clothes, or any tools closer.
• Before rinsing, always take any attachments out of the mixer.
•
In order to avoid from overheating of your
mixer’s engine operate dough-kneading
nozzles in a lower speed or position 2.
•
Do not use your mixer for blending flaring or
combustible materials other than foods.
• Do not interfere with your mixer except for
the purposes of cleaning and maintenance.
• Use your appliance for its intended purposes
as recommended.
YOUR ARZUM MİXXİ MIXER IS COMPOSED OF THE FOLLOWING
ATTACHMENTS WITH 2 DIFFERENT FUNCTIONS.
•
BEATING NOZZLES:
They are used for mixing liquid dough and
preparing cream, sauce, pudding, crepe, etc.
•
KNEADING NOZZLES:
They are used for preparing harder dough for
cookies, and for beating butter and sugar.
PUTTING INTO PLACE OF THE
ATTACHMENTS
• Before putting the beating or kneading
nozzles, make sure that your appliance is
closed “ 0 ” position and its mains plug is
disconnected from the power outlet.
• Press the beating apparatus gently until it
fits well onto the accessory connection slot.
NOTE: While using kneaders; There are single and double rims on
kneaders. Place the kneader with single rim in the slot on the right (R)
side of the product. Place the kneader with double rims in the slot on
the left (L) side. Otherwise the dough mixture move to the product
main body.
• Put the materials that you want to beat or knead into a bowl. Operate
your mixer at a proper speed suitable to the foods to be mixed. You can
increase or decrease the speed of your appliance while pushing the
speed switch left or right sides. We recommend you to begin mixing at
a lower speed, and then to
increase the speed gradually.
• Operate your mixer inside
the receptacle that you put
the materials in before and
hold the nozzles into the
bottom of the bowl uprightly.
Move your mixer inside of
the receptacle continuously. By doing so, your materials will be mixed
properly. If you intend to gather any mixture adhered to edges of the
receptacle by using any tool, ALWAYS switch your mixer off.
EN
