Azkoyen Hopper U 3030 Series, Technical Manual, Page: 7 / 25

10095 UK 09 - 2004
Technical Information: HOPPER U 6
capacities and sizes.
Coin bays
Hopper Coin capacity
Ø 24 mm
Thickness 2.8 mm
5
€ cents
10
€ cents
20
€ cents
50
€ cents
€1 €2
Small 250 450 450 350 250 275 225
Medium 400 775 775 600 375 425 325
Large 600 1,100 1,100 975 700 750 650
2. Moving flap
This element is used to move the coins and dose the flow of coins that reach the extractor disk .
Another function is to avoid the pressure of an excessive number of coins on the extractor disk .
3. Mechanical supplement of greater capacity for the coin bay
This element is a coin bay accessory that increases its capacity. There are different models and
sizes for each of the different types of hoppers.
4. Hopper full detection system
There are three ways of controlling when the hopper is at full state:
Overflow : a mechanic system that is based on the overflow of coins using gravity. The
coin capacities of these hoppers are the following:
Capacities of the hoppers with overflow
Hopper Coin capacity
5
€ cents
10
€ cents
20
€ cents
50
€ cents
€1 €2
Small N/A
Medium 430 430 350 225 300 250
Large N/A
Infrared photocells : an electronic system that uses two infrared photocells.
Scales: based on controlling the weight of the coins in the hopper. When the weight of
the hopper full of coins compresses the spring, which is regulated with a screw, a micro
switch is activated. The Scales are an accessory of the hopper that are installed on the
underside and incorporate a base for its correct installation.