5. Physical Installation
A. Installing 3.5” Hard Drives
1) Make sure power adapter and USB cable are
connected. Turn off power and insert the hard
drive into the base of the docking station. Turn
power switch on.
2) To remove, turn power off and pull the hard
drive out in an upward motion.
B. Installing 2.5” Hard Drives
1) Refer to Exterior Layout diagram on page 1.
Lift up the 2.5” HDD mounting bracket (5).
2) Insert the bracket to the mounting slot on the
front side of the docking station (4).
3) Insert the hard drive downwards into the base
of the docking station.
2
Please turn the power off before connecting or removing hard drives. When
connecting, make sure the interface connectors are firmly connected. When
the power is on, the red LED will be lit. The green LED will blink only
when there is disk activity.
