1- Measure and mark the location of the brackets
with string or chalk line. Diagonals distances
must be the same to ensure a square
installation. Adjust the strings lines accordingly.
The inside corner of the chord lines will be the
bottom flange corner of the bracket. Using a
masonry bit, dig holes to allow the installation of
the concrete crews (purchased separately)
2- With the four post brackets plumbed, proceed
to set the 4x4 wood post in place. Secure with the
screws included in the kit. Repeat for all four
posts.
3- To create a perfect fit between the 4”x4”
(8.89cm x 8.89cm) wood post and the interior
cavity of the i vinyl post (4)
4- Install J bocel (4) once the installation of the
i posts (4) is finished
7
1
2
3
4
Calzas
Calzas
Extra material
you will need
(not included)
4x4 steel post base kit (4)
(purchase from local building
center)consult the post base
kit instructions for hardware
requirements, as they pertain
to your application.
HARD FLOOR INSTALLATION
OPTION 1
{
i
J
I STA ATI
I STRUCTI
S R
A
