press the MFB button one time and it will automatically re-connect
to the last connected Bluetooth device.
5. Auto-off
The BTT005 will automatically switch off if not paired with a device
within 5 minutes.
6. LED indicator
Care and maintenance
• Do not expose the transmitter to liquid, moisture or humidity.
• Do not use abrasive cleaning solvents to clean the transmitter.
• Do not expose the transmitter to extremely high or low tempera-
tures.
• Do not dispose of the transmitter in a fire.
• Do not drop or exert excessive force on the transmitter as you
may damage the internal circuit.
• Do not attempt to disassemble the transmitter as it will void the
warranty.
2. Turning the BTT005 on/off
3. Pairing with Bluetooth devices
The general pairing steps are as follows:
1) Make sure BTT005 is off.
2) Keep BTT005 and your Bluetooth stereo receiver within 3 feet.
3) Turn on your Bluetooth stereo receiver and enter pairing mode.
4) Press and hold MFB button of BTT005 for 7 to 9 seconds and
release it when the LED flashes red and blue alternately. The
BTT005 is now in pairing mode.
5) BTT005 will automatically search for a Bluetooth stereo receiver
and complete the connection.
6) After connecting, the blue LED of BTT005 flashes twice every 4
seconds;
7) Connect BTT005 to your music player through 3.5mm audio-out
jack to play music.
Note:
• The pairing mode will last 1 minute. The BTT005 will enter
standby mode if no device is detected and paired within 1
minute.
• BTT005 can remember 8 paired devices, when the number of
paired devices exceeds 8, the first one will be replaced.
• BTT005 can pair with Bluetooth stereo receivers with the
following PIN numbers: “0000”, “1234”, “1111”, or “8888”.
4. Pairing BTT005 with Bluetooth devices
When the BTT005 is in standby mode due to a lost connection, short
FUNCTION
LED indicator
Blue LED is on for 1second
Red LED is on for 1 second
and then off
Switching on
BTT005
Switching on
BTT005
Press MFB button for
3-5 seconds
Press MFB button for
3-5 seconds
OPERATION
Troubleshooting
My transmitter will not turn on
• The batteries are low and needs to be recharged.
The sound is cutting out
• The average operating distance for this Class II device is 33 feet
(10 meters). Interior walls, wireless routers, and cordless phones
can reduce this operating distance.
I cannot pair the speaker with a device.
• This transmitter will only work with devices that support the
following Bluetooth profiles: A2DP.
I still cannot get my speaker to work
• Call our Help Desk at 1(888) 992-4639
