(5) 3-Position Switch
left position:OFF - Middle position:STANDBY - Right position:ON
In the “STANDBY” position, the audio is muted.
(6) LED Indicator
Red when the switch is in “STANDBY” position - Green in “ON” position.
(7) Audio Output Connector
This 3.5mm mono connector is where the mic is plugged in. This connec-
tor was designed to be used with a special “screw-down” connecting jack
that eliminates the possibility of the jack being accidentally pulled out. A
standard 3.5mm mono jack can also be used but will not afford the extra
protection.
(8) Metal Belt Clip
Used to attach the 32BT securely to a belt.
NOTE: Remove the battery if the transmitter is not used for a long period of time.
(the lighting flash with arrowhead symbol within an
equilateral triangle) is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons: and (the explanation point within an
equilateral triangle) is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying
the product.
page 13
A
APS 25b
using wall-mount bracket
Installing an APS-H Carry Handle:
There is an optional handle for the
APS 25b
that is easy to attach to the top
of the speaker. The handle screws into the threaded hole on the top of the speaker
by turning it clockwise. Tighten the handle until it is "square" with the speaker but
do not overtighten. Instead, once the desired position is achieved, stop turning
the handle and tighten the nut clockwise at the bottom of the handle using a
wrench or pliers.