Azbox SD99010A, User Manual

Page: 24 / 46

Time
When you entry to Timer Menu, you can see: sleep
time
、
Time Zone and GMT usage
can set sleep timer. When you set a sleep timer and the
time arrive, the system will enter to standby
automatically.
it will switch the mode between Sleep Timer Off
/15/30/45/60/90/120 minutes.
GMT Usage
: Select On or Off.
-
If you select GMT Off you can adjust the current
Date/Hour/Minute.
-
If you select GMT On, you can adjust the
followings
The “GMT Offset” :
To switch “GMT Offset” value and the range are “-12:00 ~ +12:00” increase each
half hour progressively.
TV setup
When you enter to “TV System” menu, you can set Tv saturation, Tv constrast, Tv brightness, Auto
switch off, Power on at, digital audio output, TV Resolution, Tv Mode, Tv Format
TV Format:
You can switch the screen aspect ratio
mode. Now we provide below options: 4:3 PS / 4:3 LB /
16:9 LB/16:9 FIT
TV Mode
: you can switch the tv output mode by
NTSC 、 PAL and auto
Video Output: To set video output mode
RCA(CVBS)/SCART(CVBS)/SCART(RGB)/YCBCR(YU
V)
Tv resolution: You can switch video resolution circularly
by the sequence 576P <-> 720P <-> 1080i. This effect is
equal to press V.Format Key under Full Screen and their
last setting saving will be efficient for each others.
Digital audio output: To set the both SPDIF and HDMI’s
digital audio output mode. It has options LPCM Out and BS Out,
-
LPCM Out means system will decode no matter AC3 or PCM audio track data to be LPCM,
digital audio decoder or HDMI TV will get LPCM digital audio data.
BS Out means system won’t do AC3 decode just output AC3 RAW data to SPDIF and HDMI.
Power
on at
：
Auto switch off
：
You can set whether Automatic standby or not. If “On”, it will enter into standby
mode automatically if no operation for 3/4/5 hours
TV
Brightness ： press right/left KEY to set tv brightness
TV Constrast
：
press right/left KEY to set tv constrast
TV Saturation
：
press right/left KEY to set tv saturation
Parental control
1. Change Password : To change password. You can input the new password in this item by using
number keys directly. After you filled in 4 digital numbers, the highlight will auto skip to confirm
Password and ask you to input the new password again.
Default password is “0000”.
2. Channel Lock :In order to enter to the locked channels, you should input the password. The locked
channels mark will show up a popup message on the screen and ask for the password.
3.
Menu Lock : In order to enter to the menu, you should input Password.
24