AB-6655
3
CAUTION
(2/2)
For wiring, strip each wire insulation as specified in this manual. If the strip length is longer than the specified, the
stripped part of the wires will be exposed, causing electric shock or short circuit between adjacent terminals. If it is
shorter, the stripped part will not contact the connector.
If more than the rated power voltage is applied to the product, replace the product with new one for your safety.
Failure to do so might cause device failure or overheating.
Be sure to provide a circuit breaker for the power to the product as the product does not have a power switch.
Do not test the withstand voltage of the product.
Doing so might cause accident or device failure.
Do not disassemble the product.
Doing so might cause electric shock or device failure.
Do not touch the moving parts of the product.
Doing so might cause injury.
Do not incinerate the product for waste disposal. The cover will generate toxic gas when being incinerated.
Do not reuse all or part of this product after disposal of the product.
Dispose of the product as industrial waste in accordance with your local regulations.
Do not reuse all or part of this product.
