AB-7356-U
13
Wiring precautions
1) To lead the wires into the terminals, cut out a knockout hole for a wiring port. Two knockout holes are provided on the
bilateral sides of the actuator terminals. Select a knockout hole according to the conduit mounting direction, and cut it out by
lightly knocking the hole using a screwdriver.
Figure 14. Knockout hole for wiring port
2) Unscrew the 3 setscrews (M4
10) of the terminal cover and remove the terminal cover, as shown in Fig. 15.
Figure 15. Terminal cover removal
3) Correctly connect the wires to the terminals with M3.5 screw terminal lugs, referring to Figs 16 to 20.
4) Attach the terminal cover by the 3 original screws.
Knockout hole
for wiring port
1. Unscrew the setscrews.
2. Remove terminal cover.
Terminal cover
Setscrews