Azbil Actival VY5302C Specifications & Instructions Download Page 1

AB-6758 

Specifications/Instructions 

© 2007-2019 Azbil Corporation

.

 All Rights Reserved. 

ACTIVAL™ 

Two-Way Ball Valve with Flanged-End Connection 

General

ACTIVAL Model VY5302C is a flanged-end connection 
two-way valve. It provides a proportional control of 
chilled/hot water of air handling units. 
The valve body is made of bronze. The body rating is PN16. 
It has optimal Cv value and size for controlling air handling 
units. 

This product needs to be integrated with the actuator Model 
MY53X0AX to work. 

Note: For information on wiring and other specifications of the 

actuator Model MY53X0A, refer to Specifications/Instructions 
of the actuator Model MY53X0A. 

Features

The bronze body rated at PN16.

Easy to attach the actuator Model MY53X0A to the
product without needing any tool or adjustment.

Equal-percentage flow characteristic

IMPORTANT: 

When you need to use a third-party controller for
controlling ACTIVAL, please consult with our sales
personnel before installing it.

Model Numbers and Cv Values

Model number 

Valve size 

Cv value 

Weight*1

Maximum pressure drop*2 

Close-off rating 

VY5302C0061 

DN65 

75 

11 kg 

0.35 MPa 

0.5 MPa 

VY5302C0081 

DN80 

110 

12.5 kg 

0.35 MPa 

0.5 MPa 

Note: 
*1  Weight does not include the mass of the actuator.
*2  Do not apply negative pressure to the secondary (outlet) side of the valve.

Summary of Contents for Actival VY5302C













Reviews: