Azbil ACTIVAL VY5302B Page 7 Specifications & Instructions Download

Page: 7 / 8

AB-6208-U

Figure 7. Mounting the actuator onto the valve

Mounting procedure

1) Manually turn the indicator/manual lever of the actuator

to “100” with the lever release button pressed.

Figure 8. Indicator/manual lever at 100 % (fully open) position

2) Move the lock lever to right-end to unlock.

Figure 9. Unlocking the lock lever

3) Confirm that the arrow on the top of the valve stem points

at “100”. A hole on the side of the stem faces the same
direction at which the tip of the valve joint surface (with
the actuator) points when the valve position is fully open.
(See ‘a’ in Fig. 7.)

Figure 10. Valve stem pointing at 100 % (fully open) position

4) Assemble Model MY53X0A actuator with the valve.

Engage 4 pins of the actuator with the mating holes on
the valve joint surface.

5) Move the lock lever to left-end to lock. Locked position is

indicated with the groove as shown in Fig. 11.

Figure 11. Locking the lock lever

Indicator/

manual lever

Lock lever

Lever release button

Stem

Actuator
Model MY53X0A

Valve
Model VY5302B

Press.

Turn.

Unlock.

Locked position indication

Lock.

Stem

Tip

Joint surface

Summary of Contents for ACTIVAL VY5302B









Search results

Summary of Contents for ACTIVAL VY5302B

Reviews:

Related manuals for ACTIVAL VY5302B

Brands by name

Popular brands

Azbil ACTIVAL VY5302B, Specifications & Instructions

Search results

Summary of Contents for ACTIVAL VY5302B

Reviews:

Related manuals for ACTIVAL VY5302B

Brands by name

Popular brands