8
Chapter 2. Installation, Wiring
CAUTION
Turn the power off before mounting the device on the sub-base. Otherwise, device failure may
result.
z
Mounting/removing the device and sub-base (sold separately)
z
z
Mounting
(1) Align the indentation in the center of the top of the device
with the projection on the sub-base.
(2) Once aligned as in (1), push straight downwards slowly.
(3) Tighten the device's retaining screws to secure it in the sub-
base. (Maximum tightening torque: 0.5 N
·
m)
z
z
Removing
(1) Remove the retaining screws from the device.
(2) Pull it out horizontally while holding down the sub-base.
Summary of Contents for 81447514-001
Page 58: ...50...
