Azalea Networks MSR4K44S Installation Manual Download Page 3

 

                                 

AZALEA MSR4K44S INSTALLATION GUIDE 

COPYRIGHT 2007 AZALEA NETWORKS

 3 

 

Copyright 2007 Azalea Networks 

All rights reserved. Printed in China. 2007.   
Azalea Networks reserves the right to change, modify, revise this publication without notices. 

Trademarks 

Copyright 2007 by Azalea Networks, Inc. All right reserved. Azalea, the Azalea logo, and 
MSR1000/MSR2000/MSR4K44S are trademarks of Azalea Networks, Inc. All other brand 
and product names are registered trademarks or trademarks of their respective holders. 

Statement of Conditions 

In the interest of improving internal design, operation function, and/or reliability, Azalea 
Networks reserves the right to make changes to products described in this document without 
notice. 
Azalea Networks does not assume any liability that may occur due to the use or application of 
the product(s) described herein. 

 

DISCLAIMER: LIMITATION OF LIABILITY 

1

Before installation, it’s strongly recommended and requested that users shall pay particular attention 

to the safety warnings in the starting pages and the sequent detailed operation procedures within the 
manual. If there’s any uncertainty or incapability of solving problems, it’s necessary and reasonable to 
timely contact the company’s customer support center. Please 

DO NOT

 take any risk or try to verify 

situations by yourself. Otherwise, any consequence caused by the attempt shall be completely due to 
the user himself. 

2

Please periodically check whether the installed MSR4K44S is damaged, worn-out or in danger. Any 

actual proof, sign or phenomenon of the mentioned situations shall be notified to the company or point 
of sale in time. Please 

DO NOT

 attempt to repair the product or replace any component. Otherwise, for 

any consequence arising out of or relating to the users’ attempt, including but not limited to damages, 
disuse, short circuit, fire attack, bodily injury, etc., the company shall not be liable. 

3. Users shall purchase or use the company’s MSR4K44S completely voluntarily. Users shall 
understand on their own initiative and abide voluntarily by policies, regulations or laws of the nation or 
local territories. The consequence arising out of or relating to any violation of the local laws or 
regulations by the user, shall be solely imputed to the user himself, and the company shall not be liable 
for that. 

4. The company disclaims any and all warranties and guarantees, express, implied or otherwise, arising, 
with respect to the MSR4K44S products or services, including but not limited to the warranty of 
merchantability, the warranty of fitness for a particular purpose, and any warranty of non-infringement 
of the intellectual property rights of any third party. Liability of the company for loss is limited to the 
total amount paid to the company by customer during the previous calendar year. The company will 
have no obligation or liability, whether arising in contract (including Warranty), tort (including active, 
passive or imputed negligence, strict liability or product liability) or otherwise for any special, 
incidental, consequential or indirect damages including but not limited to loss of use, loss of data, 
business interruption, loss of revenue, loss of business or other financial loss arising out of or in 
connection with any of the products or other goods or service furnished by the company under this 
manual, even if advised of the possibility of such damages.   

5

It shall never be understood that the manual expresses or implies to any customer or any third 

party authorize or transfer any rights. The company reserves fully the final interpretation of the 
MSR4K44S and this manual. 

Summary of Contents for MSR4K44S



































Reviews: