12
OPERATION INSTRUCTIONS
Leak Test
1 Make 2 3 oz of leak test solution one part liquid dishwashing detergent and three parts water
.
-
.
(
).
2 Apply several drops of solution where hose attaches to regulator
.
.
3 Apply several drops of solution where regulator connects to cylinder
.
.
4 Make sure all fire pit and light valves are OFF
.
.
5 Turn cylinder valve ON
.
.
If bubbles appear at any connection there is a leak
,
.
1 Turn cylinder valve OFF
.
.
2 If leak is at hose regulator connection tighten connection and perform another leak test If bubbles
.
/
:
.
continue appearing the hose should be returned to the place of purchase
,
.
3 If leak is at regulator cylinder valve connection disconnect reconnect and perform another leak
test If you continue to see bubbles after several attempts cylinder valve is defective and should be
.
/
:
,
,
.
,
returned to cylinder place of purchase
.
If NO bubbles appear at any connection the connections are secure
,
.
NOTE Whenever gas connections are loosened or removed you must perform a complete leak test
:
,
.
Complete installation
.
Regulator
Cylinder
/
connection
Hose
Regulator
/
connection
Perform all leak tests outdoors
.
Extinguish all open flames
.
NEVER leak test when smoking
.
Do not use the fire pit until all connections have been
leak tested and do not leak
.
WARNING
Summary of Contents for F-1350-FPT
Page 17: ...17...
