Fig.K
cm
2
cm
2
Fig.L
P3.0: RH offset
In P3.0(Fig.M), press to enter RH
offset setting. It shows blinking 0.0 RH
reading on the upper display(Fig.N).
Press to increase the offset value
and to decrease it. When finished
the setting, press again to return
to P3.0.
%
RH
%
RH
Fig.M
Fig.N
P4.0:Pressure input
(89191 only)
In P4.0 (Fig.O), press to enter
pressure input. It shows default 1013
hpa on the display with blinking value
at the upper (Fig.P). Press to
increase the pressure value and
to decrease it. Once finished, press
again to return to P3.0.
10
P2.0: AREA Size
In P2.0(Fig.K), press to enter AREA
size setting. It shows “99999” on the
lower display with the first digit flashing.
(Fig.L) The flashing digit means it is
ready to adjust. Press to change the
number and it will cycle from 0 to 9.
Press to move to next digit. After
completed, press again to return to
P2.0.
