Floodlight XLS
5
Installation Guide
Disconnect the power supply before installing the
floodlight. The unit is to be wall mounted with four
screws.
Separate the base of the
floodlight by removing
the 2 screws.
After the wiring is completed,
secure the floodlight to
its base with the 2 screws.
Set Up Instructions
Mark the position of the 2
mounting holes with pencil
before drilling.
Drill the two 6mm screw heads onto the
wall, and secure the base of the floodlight
with the two longer screws.
The mains supply lead is a
3-core cable.
L = Live and N = Neutral.
Make sure the conductors
are connected to the correct
terminals.
6mm
