Ayrton PERSEO S, User Manual

Page: 4 / 52

3
This device falls under protection-class I
.
Therefore it is essential that the device be
earthed
.
If either lenses or display are damaged (damage may include cracks or gashes in the
material) they must be replaced
.
Electrical connections such as replacing the power plug must be performed by a
qualified person
.
Make sure that the available voltage is not higher than that which is stated at the end of
this manual
.
Make sure the power cord is never crushed or damaged by sharp edges
.
If this should be
the case replacement of the cable must be done by an authorized dealer
.
If the external flexible power cord of this device is damaged it shall be exclusively
replaced by the manufacturer or their service agent or a similar qualified person in order
to avoid injury
.
When the device is not in use or before performing maintenance always disconnect the
device from the mains
.
Only handle the power cord from the plug
.
Never pull the plug out
of a socket by tugging the power cord
.
When powered on for the first time some smoke or smell may occur
.
This is caused by
coating on metal parts when heated and is normal
.
If you are concerned please contact
your distributor
.
Do not focus the beam onto flammable surfaces
.
The minimum distance between the
exiting lens of the device and the illuminated surface must be greater than 2 meter
.
Please be aware that damage caused by any modifications to the device are not subject to
warranty
.
Keep away from children and non-professionals
.
1.2. GENERAL GUIDELINES
This device is a lighting effect for professional use on stages in discotheques theatres
etc
.
the device was designed for indoor and outdoor use
.
This fixture is only allowed to be operated within the maximum alternating current as
stated in the technical specifications in section 2 of this manual
.
Handle the device with care avoid shaking or using force when installing or maintaining
the device
.
If you use the quick lock cam when rigging the device make sure the quick lock fasteners
are located in the quick lock holes correctly and securely
.
Operate the device only after having familiarized yourself with its functions
.
Do not
permit operation by persons not qualified for operating the device
.
Most damage is the
result of unprofessional operation
.
Please use the original packaging if the device is to be transported
.
The applicable temperature for the device is between -20°C to 45°C
.
Do not use the
device outside of this temperature range
.
The light source of this luminaire is not replaceable; when the light source reaches its end
of life the whole luminaire shall be replaced
.
For safety reasons please be aware that all modifications to the device are forbidden
.
If this device is operated in any way different to the ones described in this manual the product