DMX-512 control connection
Connect the signal input port of the lighting fixture to the signal output port of the LYNX
CONTROL (below fixtures are for reference))
Important : connect the fixture and LYNX CONTROL before start up the box. Switch On the LYNX
CONTROL first and then the fixtures
.
USER MANUAL
Step1:
Insert the MICRO SD card with software release into the MICRO SD port. Connect the
signal output cable of the LYNX CONTROL to the signal input port of the lighting; switch On the
LYNX CONTROL and select the required folder.
Switch ON the units linked to the LYNX CONTROL; “Long Wait” should be displayed on the units.
Step2:
Press
to enter the SD card menu, the screen will show “Browser”, “Option” and
“SoftInfo”. Select “Browser”.
Step3
:
Press
to select corresponding fixture model and software
version.
Press
to confirm
Open the folder you have selected. GSD file and TXT file will be
displayed on the screen. When you select the GSD file, its function will be displayed on the bottom
left of the screen.
Step4:
Press
to choose the GSD file you want to upgrade. Press
to confirm. Then enter the password (000000) move the cursor on the “
”press
to confirm.
If an error has been done when entering the password, move the cursor on the “
”press
to delete, then enter the correct one.