18
10.
DISPLAY
The Display offers Jog Wheel features
：
you can set the starting address
，
run the pre-programmed
program or reset the device.
The main menu is accessed by Double click the Jog Wheel until the display starts
flashing.Browse through the menu by turning Jog Wheel clockwise or counterclockwise.
Press the Jog Wheel for 2 seconds in order to exit menu, double click the
Jog Wheel
for
confirm.After accessing the edit mode
，
the unit will automatically exit to the main menu after 15
seconds from the last button press.Clockwise is positive direction while counterclockwise is
opposite direction.
When the unit is powered on
，
if no data signal is connected after 1 minute
，
then the display will
switch off automatically.The Display does not need external power to operate in case there is
battery
，
hold down the
Jog Wheel for 6
seconds and the Display will turn on by using the unit’s
battery.
PS
：
No response when quick press the Jog Wheel.
CAUTION!
THE BATTERY MUST BE A LI-ION RECHARGEABLE BATTERY,
THE SPECIFICATION IS AS FOLLOWING:
To install the battery for the first time
，
please make sure the unit is not connected to AC power.
Install the battery in the battery holder
，
then remove the battery and install it back .
This procedure must be done only for the first battery installation .