ARCALINE 3 User Manual XM1362-V1.0-NR
13
9.1.
Address
Set DMX Address
With this function, you can adjust the desired DMX-address via the Display.
1.
Access the main menu.
2.
Tap the <Up/Down> button until “Set DMX Address” is displayed.
3.
Press ENTER, the display will show “Set DMX Address”.
4.
Tap the <Up/Down> button, the display will show “A001~AXXX”
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.2.
USERS MODE
9.2.1.
User Mode
1
Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode” is displayed. Press <ENTER>, the display will show “Users mode”.
2
The display shows “User Mode” , Press <Up/Down> button, then you can choose “Edit
User Mode A”, “Edit User Mode B” and “Edit User Mode C”.
3
Press <ENTER> to confirm or press <MODE/ESC> to exit
As well as Standard Mode, Basic Mode and Extended Mode, this fixture has another three
DMX modes which can be set according to user's needs. To set one of these user modes see
below:
1
Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode set” is displayed. Press <ENTER>, the display will show “Users mode
set”.
2
Choose “Edit User Mode A”, press “ENTER”
3
Set “Max Channel=xxx” the max channel
4
Set “Edit User Mode B” and “Edit User Mode C” as above
9.2.2.
Edit User Mode A
With this function, you can adjust the rest user defined channel order.
1
Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode” is displayed. Press <ENTER>, the display will show “Users mode”.
2
The display show “Edit User Mode A” first channel, Press <Up/Down> the display will
show “Edit User Mode A”.
3
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3.
Options
9.3.1.
Status
No DMX Mode
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.
1.
Access the main menu.
2.
Press <Up/Down>, the display will show
No DMX Mode .
3.
Press< ENTER>, the display will show
No DMX Mode .
4.
The display show
Hold ,Press <Up/Down>, the display will show “Close”, “Auto”,
“Music”.
5.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
