2.) Connect the Camera to the Power Supply – we usually put a loose overhand knot in the cable
to keep the plug from being accidentally pulled out.
Configure the Camera
1.) Connect an ethernet cable between the camera and your Ayrmesh router or Ayrmesh
remote hub.
2.) Plug the Power supply
into wall power. if you
are going to use the
camera “cabled” to the
hub or router, you are
done. if you are going
to use the Camera’s
wiFi connection,
leave the camera for
at least 10 minutes to
make sure it is fully
configured.
Ayrstone AyrScout Outdoor Camera Setup
3