- Press the desired Chase button
- Press the Tap Display to switch the LCD to steps view
- Use the Bank UP/DOWN buttons to navigate steps and to locate the insert point of the new scene. The
display will read the step number
- Press MIDI/REC button to prepare the insert
- Use the Bank UP/DOWN button to locate the scene
- Press the Scene button that corresponds with the scene to be inserted
- Press MIDI/REC button to insert the scene. All LEDs will blink
Delete a scene in a chase
- Press and hold the Program button to enter programming mode
- Press the desired Chase button
- Press the Tap Display button to switch the LCD display to steps
- Select the Scene/Step to be deleted by using the Bank UP/DOWN buttons
- Press Auto/Del button to delete the step/scene. All LEDs will blink
Run multiple chases at once
This feature is used to be able to create a certain loop of a few chases, for example if you wish to want to
have one light effect active, then the other one.
- Press and hold Auto Del button
- While holding down Auto Del button, press and release each chase you wish to add to the chase loop
Delete a chase
- Press and hold the Program button to enter programming mode
- Press the Chase button (1-6) to be deleted
- Press and hold Auto/Del button and the respective Chase button to delete the chase. All LEDs will blink.
Delete all chases
NOTE:
This action will result in the loss of all saved chases! The individual scenes and step memory will be
saved.
- Turn off the controller
- Press and hold the Bank DOWN button and the Auto Del button while turning on the controller
- All LEDs will blink
Scene programming (steps)
Insert a scene
- Press and hold the Program button to enter programming mode
- Press the desired Chase button
- Press the Tap Display button to switch the LCD display to steps view
- Use the Bank UP/DOWN buttons to navigate steps and locate the insert point of the new scene. The
display will read the step number
- Press the MIDI/REC button to prepare the insert
- Use the Bank UP/DOWN buttons locate the Scene
- Press the Scene button that corresponds to the scene to be inserted
- Press MIDI/REC button to insert the scene. All LEDs will blink.
NOTE:
Scenes will be inserted after the selected step.
Copy a scene
- Press and hold the Program button to enter programming mode
- Select the bank that contains the scene to be copied, using the Bank UP/DOWN buttons
- Press the Scene button that corresponds to the scene to be copied
- Press the MIDI/REC button to copy the scene
- Select the destination Bank that contains the scene memory to record onto, using the Bank UP/DOWN
buttons
- Press the desired Scene button to complete the copy process. All LEDs will blink
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 3.0
Creation date + author initials: 14-01-2014 RV Revision date + author initials: 18-11-2014 RV