2
Safety precautions
WARNING:
This unit may cause serious injury to eyesight when used incorrect. It therefore is strongly
advised to read this user manual carefully, to get familiar with the functions of this laser device.
WARNING:
This unit must be operated by, or under the supervision of an adult. This device is not
suitable for children.
WARNING:
Do not look directly into the beam coming out of the lens, from short distance or when a
solid beam is projected. This may cause serious injury to eyesight. Ayra is not responsible for any
injuries caused by incorrect use of this device.
WARNING:
Do not project the beam of this unit on to reflective surfaces, as the shattering beam may
cause injury to eyesight.
Installation requirements:
- Always check the voltage settings on the unit and the power supply you want to connect the device
to. If the voltage requirements do not meet, do not connect the device as this may cause serious
damage.
- This device must be installed by a professional technician, in a standing or hanging position. Always
pay attention to the positioning of the unit, as the beams may project directly into your audience.
- It is strongly advised to
NOT
project the beams directly into your audience. Ayra strongly
recommends a minimum distance of 1.5 meters in height between the lowest projected laser beam
and your audience, for optimal safety. If there is no other option, keep a minimum distance of 5 meters
from the beam exit to the first beam that hits your audience.
- When installed in a standing position, a safety cable is recommended to secure the unit.
- When installed in a hanging position, this unit
MUST
be secured by using a safety cable, capable of
holding 10x the weight of this device.
- When installed in a hanging position, this unit must be mounted to a proper surface, e.g. a truss
system. When using a truss system, Ayra recommends the use of a proper hook or halfcoupler.
- Make sure there are no flammable objects in the direct environment of the device (such as
decorative objects). Keep a minimum distance of 1.5 meter.
- Do not block the beam-exit and fan
- Keep a minimum distance of 0.5 meter from any walls to provide sufficient cooling
- Make sure the beam-exit and fan are not blocked by any objects in the near environment
- This unit must be connected to a grounded power supply that meets the voltage requirements of the
device.
Maintenance and protection
- Keep the unit away from dusty environments, as this may have negative effect on the fan-cooling
system and laser optics. Ayra recommends using a flightcase for storage of this device. Clean the
optics and fan of the laser with a small, soft brush and vacuum cleaner when needed. Clean the
housing of the unit with a damp cloth.
WARNING:
Always disconnect the unit from the power supply
when cleaning the unit. Reconnect the unit only if any moist on the fixture disappeared completely.
- This laser device is a lighting effect, designed to support visual entertainment while playing music.
Continuous use is not recommended. Do not use the device longer than 3 hours subsequently, so the
unit can cool down. This will provide a longer lifespan for the diodes. Apply a cooling-down time of 25
minutes before re-activating the laser.
- Do not switch the power on and off too often, as this may cause serious damage to the unit.
