background image

- Disconnect this device from a power source if it will not be used for a longer period of time, if maintenance 
is necessary, or if it needs to be cleaned.
- Do not pull on the cable to remove a connector, as it can cause damage.
- Do not use any cables other than the ones described in this manual. Do not use defective cables. Please 
contact your dealer if the included or necessary cables do not function properly with this device.
- Only use this device with a stable AC power supply.
- Only use this device with power from a grounded power source. 
- In the event that the device is exposed to extreme temperature changes (e.g. transported through a cold 
outside environment into a warm indoor environment), it should not be turned on until it has reached room 
temperature. This is necessary to prevent moisture from forming in the device, which could lead to electric 
shocks.

Guidelines and operation of this device:

- This device is intended for use by professionals on stage, in theatres, in clubs, and in similar entertainment 
locations. 
- This device is not suitable for use by children, and should always be operated by an adult.
- This device is designed to create light effects for entertainment purposes. It is not suitable for household 
illumination.
- This device may only be used in a suitable environment where no damage to the device can occur. Do not 
use the device in moist or dusty environments such as:

- indoor swimming pools where chlorine is used
- beaches where there is sand and salt
- outdoors
- indoors in spaces where intense heat sources are present, or where it reaches temperature levels 

that would be considered uncomfortable for a person
- Avoid impact and collisions during use and transport. Do not transport the device while it is in use. Avoid 
using excessive force when installing and operating the device. 
- The user should become familiar with the functions of this device before using it. 
- Should the device not be used in the manner described in this user manual, damages or even injuries could
occur. Ayra cannot be held responsible for any injuries or damages that occur as a result of improper use of 
this product.

Storage and transport:

- This product was designed for mobile use. Please only transport the device in the original packaging, or in 
a flight case with a suitable foam inlay. 
- This device was not designed for permanent (24/7) use. The expected lifespan of the device will not be 
affected by occasionally turning the device off. Disconnect the device or turn off the power when it is not 
actively in use. 
- If the device will not be used for a longer period of time, it should be disconnected and stored in a dust-free 
environment. 
- Do not expose the device to extreme temperature differences. 

Housing

- Inspect the device's housing frequently, and always just before use. Avoid operating the device if there are 
large dents or cracks, or if screws are missing. Do not use the device if the housing is not in good condition. 
Contact your dealer or a qualified technician if you are unsure about the state of the device.
- Check the device and the screws for corrosion. Corrosion must not be present on this device. Contact your 
dealer or a qualified technician if you find any corrosion on the screws. 
Every power and signal connector should be securely attached. Do not use the device if the connectors are 
not secure.
- Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the power supply and 
wiping it down with a dry or slightly moist cloth. If the device is used frequently, the cleaning intervals should 
increase.
- Voorkom de opbouw van stof en vuiligheid. Maak het apparaat eens per maand schoon door het apparaat 
te ontkoppelen en met een droge of licht vochtige doek schoon te maken. Wanneer het apparaat vaak 
gebruikt wordt, dient de schoonmaak-interval verhoogd te worden.

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials: 07-10-2019RV

Revision date and author's initials: -

Summary of Contents for 9000-0051-4483














Reviews: