background image

Safety instructions

This unit must be operated by, or under the supervision of an adult. This device is not suitable for children. 

Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual

- Make sure there is no damage caused by transport. If the device seems damaged from the outside, do not 
use it and contact your dealer for more information.
- To make sure the device remains in perfect condition and for safe operation, the user must follow the 
instructions and warning notes of this user manual.
- Damage caused by improper use or modifications to the device are not covered by the warranty.
- This device does not have any user-serviceable parts inside. This device must be serviced by qualified 
technicians.

Important notes regarding health and safety:

- Never let the power cord come in contact with other cables. Handle the power cord and all mains 
connectors with caution.
- Never remove any warning or informative labels from the unit.
- Never leave cables lying around.
- Do not open the device and do not modify any hardware or software.
- Do not connect this device to a dimmer pack.
- Do not switch the system on and off frequently, as this will reduce the lifespan of the device.
- Only use this device indoors, avoid contact with water, moisture and other liquids. Do not place items filled 
with liquids on top of the unit.
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable 
items.

The information and illustrations shown in this user manual are subject to change without  notice.

User manual version: 2.0

Creation date + author initials: 27-01-2016 RV Revision date + author initials: 23-07-2016

WARNING!

Always keep this device away from damp or wet conditions! Hazardous electric shocks may 
occur!

WARNING!

Only connect this device to a matching power outlet. This device is intended to work on a 
specified AC current. Connecting this device to power outlets with other voltages may result in 
permanent damage and/or hazardous situations, like fires or electric shocks!

WARNING!

Be careful with the operation of this device. Touching live wires inside and outside the unit may 
cause hazardous electric shocks!

Summary of Contents for 9000-0027-4693














Reviews: