Operating modes
The IntenZ CB600 offers various operating modes, each with its own advantages. For simple events there
are stand-alone modes, and for advanced situations it's possible to create synchronised light shows. You can
also control every feature of the CB600 via DMX in various channel modes. A short description for each mode
can be found below:
Auto:
Automatic light show with pre-programmed internal shows on a user defined speed. The speed of the internal
programs can be adjusted from 1 to 9.
Sound:
Automatic light show with one of the pre-programmed internal shows in sync with the music, thanks to an
internal microphone that picks up the beat of the music and changes a step every time a beat is detected.
Use the Sens mode to change the sensitivity of the internal microphone so it will respond optimally to the beat
of the music. In this mode, any set function in the Auto mode is overruled, and the fixture will change effects
in sync with the beat of the music. Please ensure that the sound controlled mode is set to 'on', otherwise the
built-in microhpone is inactive and the unit will not respond to music.
Slave:
In master/slave mode, it is possible to link several IntenZ CB600 fixtures together, to create synchronised
light shows in the automatic or sound controlled mode. The first fixture in the chain must be set in the Auto or
Music mode, and the other fixtures must be set to Slave, so they will mimic the behaviour of the first fixture.
The master/slave function requires 3p or 5p XLR male – XLR female cables (not included). Connect the DMX
out of the master fixture to the DMX input of the second fixtures, and so forth.
In addition to this, the CB600 has a special feature, which makes it possible to create larger matrix designs in
stand alone mode. Thanks to the slave adressing (SL2 – SL16), users are able to give every CB600 panel
used in the matrix a Slave ID. Based on this, the internal light show of the master sends signals to the slave.
One 4x4 (16 fixtures!) matrix of CB600 fixtures is instantly transformed in a low resolution video wall!
The master fixture must be set to SLSH, while the others are set to slave in a very particular order to ensure
perfect display of the several built-in effects.
The built-in effects of these modes are also suitable for use with only 2 or 4 panels. The images below
describe the position of every panel and the assignment of master/slave, as well as the master mode required
to achieve the desired effect.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 13-05-2015 RV Revision date + author initials:
