INSTALLATION TIPS
It is the responsibility of the installer to ensure
that the product is installed correctly and due care is
given to the instructions.
Your guarantee is invalid if the instructions have
not been followed correctly.
-
Please check for all visual defects on the product before
installation - such defects will not be accepted after
installation of the product
-
For shower enclosures a spirit level should be used to
ensure your shower tray is level - if the shower tray is
-
distance in from the tray
-
and that all screws are fully tightened
-
-
Ensure magnets are the right orientation are attracting
rather than repelling
-
Ensure silicone is used to waterproof your
shower enclosure
-
Care must be taken during assembly. Flair will not take
responsibility where incorrect assembly results in undue
stress being put on any of the glass components in
this product
-
If there are any manufacturing problems please
call Flair Service Line on +353 42 966 8000
Note:
If the problem has been caused by poor
installation, there will be an initial call-out charge for
our technical engineer and subsequent charges to
installation.
CLEANING
ClearVue glass coating is a standard feature on all AYO walk-
in enclosures. This easy to clean glass coating is applied to the
glass surface and ensures that soap deposits and lime scale are
easily cleaned off the glass.
Glass
:
Use a soft cloth and mild detergent,
rinse off thoroughly
*
Metallic Surfaces
: Use a soft cloth and warm soapy water
*
Painted Surfaces
: Use a soft cloth & mild detergent,
rinse off thoroughly
*
*
Do not use “Spray & leave” cleaning products on the
metal surface as these will cause damage to your shower
door. These include acidic based cleaning products,
bleaches, solvents or abrasive pads. These will damage
*
In hard water areas, regular cleaning of your Flair door
will help to prevent the buildup of limescale. Stubborn
deposits of limescale can be removed with the use of a
mild limescale remover.
*
Only use detergents, cleaners and limescale removers
with a pH of 5-8.
*
the product over time if not thoroughly rinsed off.
MAINTENANCE TIPS
-
Check your shower door for functionality periodically
-
Ensure that the wheel track is free from any grit/dirt
which may have collected over time
-
Lubricate the wheel systems and track using a suitable
-
Only use non-abrasive cleaning agents on all Flair
products and rinse off thoroughly.
-
Do not use excessive force when opening and closing
your shower door as this could result in shattering
-
Do not hang from your shower door or shower door
handle - it is not designed to support excessive weight.
INSTALLATION &
MAINTENANCE