Chapter 1
OVERTURE
Electrical wheelchair
SPECIFICATIONS:
1.
Flip-Up side panels
2.
Backrest
3.
Height Adjustable Armrest
4.
Joystick
5.
Parking Brake Lever
6.
Controller
7.
Rear Wheel (Drive wheel)
8.
Drive Motor
9.
Adjustable Footrest
Never stand on the footrests when entering or leaving the Smart Wheelchair.
Ensure that both parking brakes are applied, fold the footrests upward and enter the Smart
Wheelchair from the front. When you are seated, fold the footrest plates back down to
the normal position.
To adjust the armrest height, pull out the spring-loaded plunger on the side panel and pull
or push the armrest upward or downward until the plunger engages in the respective hole
of the vertical guide rail to give the required armrest position.
Once seated and satisfied that the footrests are correctly adjusted, check to see that the
controller is in a convenient position so that you can reach it easily and safely. To adjust
the controller forward or rearward, loosen star knob and retighten after adjustment.
If your smart wheelchair begins to move in an unexpected manner, immediately
release the joystick. Unless the joystick is damaged, this action should stop your
smart wheelchair.
www.ayecogroup.com
Unlike manual wheelchairs, GoBee
do not require upper arm strength
to move forward.
DO YOU KNOW?
