Ayce SW-25, Original Instructions Manual, Page: 29 / 34

57 56
INSTALLATION
1. Install the fan according to below instructions.
(1) Fix the six wheels [12] in the base [11] (Figure 1).
(2) Disassemble the base nut[13] from body[9], put fan body [9]
through the hole of base [11], and fix them tight by base nut[13]
(Figure 2).
(3) Put motor set[7] into the hole of body[9], fasten the motor set [7]
with the fixation screw [8] (Figure 3).
(4) Disassemble the mountingnut[5] from motor set[7], put the rear
fan grill [6] on motor set [7], and align the 3 positioning point to
the holes on grill, finally fasten grill mounting nut [5]. (Figure 4).
(5) Fix the blade [4] on motor shaft and align slot on blade to pin on
motor shaft, then counterclockwise fasten blade cap [3]
(Figure 5).
(6) Assemble front fan grill [2] to the rear grill [6], Fix the grill with
the crew on grill buckle. (Figure 6).
Open the package and take out the products, make sure all
components are included, IM, remote control, etc.
Figure 1
Figure 3
Figure 5
Figure 2
Figure 4
Figure 6