!
!
70
|
71
GB
The water level of the tank shouldn't be lower than the minimum level when
the cooling/humidifier function is turned on.
FILLING THE TANK WITH WATER
To avoid serious personal injury from accidental starting, always make sure
the switch is turned “OFF” and the plug is removed from the mains before
refilling.
The water tank is located in the rear of the unit. Rotate the locked trigger (part 10) to
unlock the water tank, and pull the water tank out and pour water carefully into the tank.
(Fig.3)
The Water Level is shown by Water Level display window(part 4) on the front of the unit.
Refill the water tank when water level is low. The water level of the tank shouldn't exceed
the maximum level.
After filling the water, insert and lock the water tank to the original position.
Fig. 3
Fig. 4
!
Power switch
Cooler/Humidifier function
Setting the motion of the louvers
Setting timer function for automatic
shut off
Setting fan mode
Setting fan speed
REMOTE CONTROL
Fig.5
This unit is equipped with a remote control (Fig.5).
Please point to the receiver (part 2) when using the remote control.
If the battery voltage is low, please open the battery cover as shown in the figure and
replace with new battery (CR2032).(Fig.4)
Please note the positive pole and the negative pole of the battery; then put the battery
cover back.
CLEANING AND MAINTENANCE
To avoid serious personal injury from accidental starting, always make sure
the switch is turned “OFF” and the plug is removed from the mains before
cleaning and maintenance
。
