Ayce 7613164565631, Original Instructions Manual, Page: 37 / 40

Using with the remote control
The remote control has the same 6 buttons as the operating panel (MOD = MODE) and
works in roughly the same way, but:
You cannot use the remote control (under M-mode)
to set the capacity with the + or – buttons.
Use the bar button for this purpose.
The remote control has an ECO button for an energy
efficient mode; the heater maintains the room at 16°C.
The screen shows EC.
Deactivate by pressing ECO again. Nothing else can be set under
this setting.
If the heater is working on ECO setting and a timer setting becomes active, the heater will
start to work according to the timer setting.
When the heat goes off, the heater will NOT return to the ECO setting, but go off.
SAFETY MEASURES
The heater is equipped with a topple safeguard which switches the heater off if it acciden-
tally falls over. It will start working again once it has been set upright.
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air.
As mentioned above, this is generally caused by (partially) covering the heater, obstructing
the air intake and/or outlet grills or installing the heater too close to a wall or something
similar. After cooling down, the heater will automatically switch on again.
CLEANING AND MAINTENANCE
1. Make sure the heater has been unplugged from the power and completely cooled down
before cleaning.
2. Do not use gasoline, thinner, diluents and other liquids which will damage the heater surface.
3. Wipe with a dry cloth to remove dust and a damp cloth (not wet) to clean off stains, be
careful not to allow moisture into the heater.
4. If the heater is hung on the wall, clean the back and the space behind the heater. Then
remove the heater from the wall, see ‘Installation’.
5. Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage any
internal parts during cleaning!
STORING
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction
manual back into the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storage as this may damage the appliance.
72 | 73
Information requirements for electric local space heaters
Model identifier(s):LPL-15A-4
Item Symbol Value unit Item unit
Heat output
Nominal heat output
Minimum heat output
(indicative)
Maximum continuous
heat output
At nominal heat output
At minimum heat
output
In standby mode
Pnom
Pmin
Pmax,c
elmax
elmin
elsb
2.0
0.8
2.0
NON
NON
0.0003
kW
kW
kW
kW
kW
kW
NO
NO
NO
NO
NO
NO
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
Type of heat input, for electric storage local
space heaters only (select one)
Manual heat charge control,
with integrated thermostat
Manual heat charge control
with room and/or outdoor
temperature feedback
Electronic heat charge control with room
and/or outdoor temperature feedback
Fan assisted heat output
Type of heat output/room
temperature control (select one)
Single stage heat output and no room
temperature control
Two or more manual stages, no room
temperature control
With mechanic thermostat room
temperature control
With electronic room
temperature control
Electronic room temperature
control plus day timer
Electronic room temperature
control plus week timer
Other control options
(multiple selections possible)
Room temperature control,
with presence detection
Room temperature control,
with open window detection
With distance control option
With adaptive start control
With working time limitation
With black bulb sensor
Contact details : Jumbo-Markt AG, Industriestrasse 34, 8305 Dietlikon Tel. +41 848 11 33 11
GB
Auxiliary electricity
consumption
MODE SET
ECO
WEEK