6
8
7
TROUBLESHOOTING
If conditions listed below occurs, please check the following items before calling
the customer service.
The unit doesn't
operate
Has the power cord been
disconnected?
Plug the power cord into the
outlet.
Is the tank full indication
lamp blinking? (The tank is
full or in a wrong position.)
Empty the water in the
drainage tank and then
reposition the tank.
The
dehumidifying
function doesn't
work
Is the air filter clogged?
Clean the air filter as instructed
under "Cleaning the
dehumidifier".
No air is
discharged
Is the air filter clogged?
Clean the air filter as instructed
under "Cleaning the
dehumidifier".
Is the intake duct or
discharge duct obstructed?
Remove the obstruction from
the discharge duct or intake
duct.
Operation is
noisy
Is the unit tilted or
unsteady?
Move the unit to a stable,
sturdy location.
Is the air filter clogged?
Clean the air filter as instructed
under "Cleaning the
dehumidifier".
Is the temperature of the
room above 35
℃
or below 5
℃
?
The protection device is
activated and the unit cannot
be started.
Problem
Possible Caus
Solution
Switch the device off and remove the plug from the
socket before cleaning.
Clean the housing with soft, dry cloth. If the device is
extremely dirty, use a mild cleaning agent. Wipe the
dehumidifier with a slightly damp cloth. Never spray
Storage
If the dehumidifier will not be used for a long period of time, take the following
steps:
Remove the plug from the socket and empty the tank make the tank and the
dehumidifier, dry completely, this may take a couple of days.
Clean the air filter.
Check the dehumidifier for perfect condition to ensure a safe use of it after a
long period of storage.
Pack the device with the suitable packaging.
Store the dehumidifier in a dust-free and out of direct sunlight location,
preferably covered with a sheet of plastic.
1.
2.
3.
4.
5.
3.
4.
the device with water.
Remove the filter, clean the filter with a vacuum
cleaner or soapy water no hotter than 40 °C.
(Fig 6 & Fig 7)
Rinse and dry the filter completely before installing
back to the device. Insert the filter into the unit in
smoothly. (Fig 8)
GB
52
|
53
