Remote control
Control panel
Symbol
Button function
ON/OFF button: Turn on and Turn off the whole heater.
Light button: Select and turn On /Off the LED light, and also adjust its
power, there are 5 powers settings, loops from 1 to 5.
Upper tube button: Select and turn On/Off the upper heating tube, and
also adjust its power, there are 5 powers settings, loops from 1 to 5.
Digital displayer: Display the power setting of the working component.
It always displays the power setting of the upper tube if the upper tube
is turned on.
Buttons have the same function as those in the control panel.
When using electrical appliances, basic safety
precautions should always be followed. Failure to
comply with these instructions may cause a fire,
electrical shocks or other injury to persons or
property.
CAUTION — SOME PARTS OF THE HEATER WILL BE
VERY HOT, DO NOT TOUCH WHEN THE HEATING IS
WORKING.
In order to avoid overheating, do not cover the heater.
The fireguard of this heater is intended to prevent
direct access to heating elements and must be in
place when the heater is in use; The fireguard does
not give full protection for young children and for
infirm persons.
Do not use this heater in the immediate surroundings
of a bath, a shower or a swimming pool.
This heater is not equipped with a device to control
the room temperature.
Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room
on their own, unless constant supervision is
provided.
Children of less than 3 years should be kept away
unless continuously supervised.
Children aged from 3 years and less than 8 years
shall only switch on/off the appliance provided that it
has been placed or installed in its intended normal
operating position and they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved.
Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance or
perform user maintenance.
CAUTION — Some parts of this product can become
very hot and cause burns. Particular attention has
to be given where children and vulnerable people
are present.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Remove product from the packaging and ensure it is
in good condition.
DO NOT let children play with the packaging, for
example plastic bags.
Check that the voltage and frequency of your
appliance match your mains voltage before plugging
in.
This heater is hot when in use. To avoid burns DO
NOT touch the grilles or heating element during use
or attempt to move the heater.
DO NOT touch the heater with wet hands.
DO NOT operate any heater with a damaged cable or
plug, or after the heater malfunctions, has been
dropped, or damaged in any manner. Return the
heater to an authorized service facility for
examination and repair.
DO NOT attempt to repair or adjust any electrical or
mechanical functions as this may void warranty.
DO NOT insert or allow objects to touch the heating
element and never place anything on the heater
safety guard (e.g. towels), as this may damage the
heater and could cause an electrical shock or fire.
Never use your heater to dry washing.
If the heating element has stopped glowing it may
still be live, please check that the heat setting
indicates the heater is off. Always disconnect your
appliance from the mains before any cleaning or
replacing tubes.
DO NOT use the heater in areas where petrol, paint,
or other flammable substances are stored.
Always unplug the heater when not in use. To
disconnect from the power supply, grip the plug and
pull from the power socket. Never pull by the cable.
DO NOT direct the heater towards curtains, furniture
or other flammable objects and ensure that there is
a minimum distance from objects around.
Do not use this heater in conjunction with a timer
device or any other device, which facilitates
unattended switch on.
Do not pull the power cable or the device itself to
unplug it from the socket, pull the plug directly.
Do not let children or incompetent people use device
without supervision.
The power cable must be fully unwound before use.
If the appliance is not used for a long period,
disconnect it from the power supply.
If the supply cable is damaged , it must be replaced
by the manufactory, its service agent or similarly
qualified person in order to avoid a hazard.
This product is not designed for use by persons
(including children) who have reduced physical,
sensory or mental capacities or persons with no
experience or knowledge, unless they are instructed
and supervised in the use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with appliance.
This heater should be placed on a flat level floor.
The heater must not be located immediately below a
socket outlet.
Do not use this heater with a programmer, timer,
separate remote-control system or any other device
that switches the heater on automatically, since a
fire risk exists if the heater is covered or positioned
incorrectly.
To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other
liquid.
Warning: Always unplug the heater when it is not in use.
Note:
When all tubes and light are on, the digital displayer displays only the power
setting of the upper heating tube. If the upper heating tube is off, it displays that of
the LED light.
Heating arm can work in vertical or horizontal position.
Open the heating arm (Only for Model EH900) as following instructions, and close it
in the reverse direction.
1.
2.
3.
4.
5.
GB
80
|
81
Plug in the powder cable, a “Beep” sound is heard. The heater is in “Stand By”
status, the ON/OFF is a green light.
Press the “ ” button on remote control or control panel, the light will turn
red, and the heater switch to a working status. The heating tube and the LED
light are preset in power 3. (The Heater with memory function and working at
last setting).
Press the “ ” or “ ” button, the relative tube or light and the digital
displayer will flash for 5 seconds, press the same button to adjust the heating
or light power while the power section is showed in the displayer. The flashing
will stop after 5 seconds and the adjustment is finish.
If you want to turn off only one tube or light, press the relative button and
press “ ” button immediately. To turn the tube or the light on again, push
the relative button.
Turn off all tubes and light by pressing “ ” button , the heater turns to
“Stand By” status.