Ayce 7613164329271, Original Instruction Manual

Page: 78 / 88

• Practice first on a scrap piece of material to gauge the correct feed rate and the
cut dimensions.
WARNING
!
Always use two hands to hold the planer.
WARNING
!
Where possible, clamp the work piece to the bench. In between
operations, you can rest the planer on a flat surface with the blade
protection foot hinged down to support the planer so that the blades
are kept clear of the surface.
b. Chamfering edges
•
The fast and simple chamfering of edges at an angle of 45° is made possible by the
V groove integrated in the front base plate.
• Place the plane with the V groove on the edge you wish to machine and move it
along it, ensuring that you move it at an even speed and maintain a constant angle.