3
3- Operation and Adjustment Operations
There are 3 programming buttons on the board: UP, DOWN and ENT. You can increase
the value of a parameter by pressing UP and decrease it by pressing DOWN button. After
setting it to the desired value, press ENT button shortly to confirm.
In order to enter adjustment menu press 3 seconds ENT button.
Floor Level Light: is used in systems with semi-
automatic doors. If this box is activated then AT FLOOR LEVEL indicator is lighted when
the car is at floor level.
Text Color: defines the color of the numbers and characters.
Arrow Color: defines the color of the direction arrow.
Back Color: defines the background color of the display. An image can be shown also in
background when IMAGE is selected in this box. The picture for the background should
be saved into the SD card with the name “tft .bmb” and it should be an image file in bmp
format.
Language: defines the screen language.
.
ID: is the floor number of the LOP.
Buzzer Level: defines volume level of
buzzer.
Simulation Floor: defines maximum
floor number shown in simulation
mode.
Simulation: If simulation is passive LOP
function normally and communicates
via CAN BUS. If simulation is active LOP
Works in simulation mode without
accepting calls and communicating
with the contoller.
After editing all parameters
parameters press ENT button 3 for
seconds to save them and exit.
