-31-
CORRECT TRANSPORTATION AND PLACEMENT
1. Lift at the bottom when transportation, don’t move
it by slide the door.
2. Keep upright and ‘keep flat’ stow level. Inclination
between the body and ground should be no more than
90°but no less than 45°.
3. Avoid crashing and violent vibrations during
transportation.
4. Place the appliance in a dry and regularly ventilate
room. Keep away from heat emitting
and oil or coal
fired stoves. Behind the appliance there should be a
distance no less than
100mm, also the two sides and
above, in order to assure adequate ventilation.
5. The appliance should be placed stationary, not on
foam or plastic, etc. soft physic.
6. Don’t place the appliance near substances which
are inflammable or easily eroded.
CORRECT OPERATE AND MAINTENANCE
1. A 10A safety fuse should be installed on the power
supply code, and use a single grounded socket.
2. Don’t extent the power code or add other electrical
load.
3. Operate the appliance emptily at the first time, turn
the temperature knob to “1-4”, then the compressor
start operating. Keep operating 30 minutes, put hands
both onto the outside and inside.If hot outside and cool
inside, that means the appliance work normally.
