AYA AFM2202A+, Instructions For Use Manual

Page: 27 / 29

Changing the light bulb
If the light bulb is damaged, DO NOT CHANG IT BY THE USER!
Changing the light bulb carry out by inexperienced persons may cause injury or serious malfunc-
tioning.
it must be replaced by a qualified persons in order to avoid a hazard. Contact your local Service
Force Center for help.
Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit
breaker.
Warning!
12
Light bulb data: 220-240 V, max. 15 W
1. To switch off the appliance, set the temperature regulator to position “0”.
2. Unplug the mains plug.
3. To change the light bulb, undo the screw.
4. Press the light bulb cover as shown and slide it backwards.
5. Change the defective light bulb.
6. Refit the light bulb cover and the screw.
7. Put the refrigerator back into operation.
Trouble shooting
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Whenever the compressor switches on or off, a click can be heard.
As soon as the compressor is in operation, you can hear it humming.
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Even after the compressor has been switched off, this noise of splashing can be heard for a
short time.
Correcting Malfunctions
Spare parts:
The following spare parts can be ordered from your local Service Center. You can fit
these yourself without any special skill or training, e.g.:
Butter/cheese compartment,
Egg holders,
Door racks,
Fruit and vegetable drawers,
Storage racks.