-
44-
Using the dispenser
• Push in the lever of the water dispenser with your glass.
• Releasing the lever, stops further dispensing of water.
• Flow rate is dependent on how far the lever is pushed back:
Fully back = full flow
Gently back = trickle
• As the level of water in your cup/glass rises, gently reduce the
amount of pressure on the lever to avoid overflow.
Notes: Push the water dispenser lever with a rigid cup. If you
are using a plastic disposable cup, then push the lever with your
fingers from behind the cup.
Clean the water tank
• Remove the water tank by pulling out the fixed handle.
• Take off the cap I. Clean the tank with warm and clean water.
• Install the water tank and push back the fixed handle.
• To prevent possible leakage, ensure that any parts removed
during cleaning are refitted correctly in their original locations.
Notes: The water tank and dispenser components are not
dishwasher-proof.
Drip tray
• Water dripping from the dispenser while in use, accumulates
in the drip tray.
• Remove the drip board. Clean the board and tray with a clean
and dry cloth.
• Put the drip board back.