EN-1
4
1. Open the terminal board by inserting a screwdriver
into the side tabs of the power code cover. Use the
screwdriver as a lever by pushing it down to open the
cover as below:
2. Connect the electricity follows the diagram as printed in
the surface of power code cover.
3. Fasten the supply cable in place with the clamp and
close the cover of the terminal board.
Note:
The red electricity indicator on conntrol panel will
illuminate once connect to electricity.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
Power supply voltage and frequency:
The electric cooker without a power supply cable. The
cooker is designed to operate on an electricity supply
which conforms to the electrical data shown on the
Rating label. The cooker can be connected to the mains
only after removing the back panel of the cooker itself
with a screwdriver.
Note:
the following installation procedure must be carried
out by a qualified electrician. For the installation of the
feeding cable carry out the following operations:
220-240V~/380-415V
3N~,50-60Hz
Summary of Contents for ACV5062SILV
Page 57: ...EN 27...
Page 58: ...EN 28...
Page 59: ......
Page 60: ...BUT INTERNATIONAL 1 avenue Spinoza 77184 EMERAINVILLE FRANCE PN 16171100A27985...