AYA ACT1004, Instructions For Use Manual

Page: 43 / 50

- 16 -
1. Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling
effect and energy saving.
2. The interior of the refrigerator should be cleaned regularly to avoid odor.
3. Check the door gasket regularly to make sure there are no debris.
4. Please turn off the power before cleaning, remove all food, shelves, drawers, etc.
5. Clean the door gasket with mild soap and water.
6. Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking
soda and a quart of warm water. Then rinse with water and wipe clean, and open the door and dry it
naturally before the power is turned on.
7. For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or
corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when
necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminant
accumulation in these areas.
8. Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the
interior of the refrigerator.
9. Clean the bottle frame, shelves and drawers with a mild detergent and dry with a soft cloth.
10. Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
11. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage the fridge surface and interior. Boiling water and
benzene may deform or damage plastic parts.
12. Do not rinse with water so as not to affect the electrical insulation properties.
Cleaning