Installation Guide for Axxon LF755KB PCI Express (PCIe) 4 Port RS422 SMPTE I/O Card (Low/Standard Height Mounting)
V1.0
Axxon Computer Corporation
8
The options available through the configuration program are copied below.
LF755KB SMPTE 4 Port RS422 PCI Express I/O Card EE Configurator for DOS v0.2
============================================================================
(c) 2008, Axxon (OEM) << For INTERNAL Use only >>
Motherboard PCI Bios Present Status : Found & supported!
------------------
Configuration Menu
------------------
1. Change Port # 1 to be a Master (DTE / Controller)
2. Change Port # 1 to be a Slave (DCE / Emulator)
3. Change Port # 2 to be a Master (DTE / Controller)
4. Change Port # 2 to be a Slave (DCE / Emulator)
5. Change Port # 3 to be a Master (DTE / Controller)
6. Change Port # 3 to be a Slave (DCE / Emulator)
7. Change Port # 4 to be a Master (DTE / Controller)
8. Change Port # 4 to be a Slave (DCE / Emulator)
9. Change all Ports 1 -> 4 to be Master (DTE / Controller)
A. Change all Ports 1 -> 4 to be Slave (DCE / Emulator)
Q. Quit
The configuration parameters are non-volatile and therefore will remain active even
during a power off of the host system.
Please note the following relationship on the onboard LED to external cable mapping.
Port 0 LED is associated with the DB9F connector 1 on the cable assembly. This is Port # 1 in the configuration s/w.
Port 1 LED is associated with the DB9F connector 2 on the cable assembly. This is Port # 2 in the configuration s/w.
Port 2 LED is associated with the DB9F connector 3 on the cable assembly. This is Port # 3 in the configuration s/w.
Port 3 LED is associated with the DB9F connector 4 on the cable assembly. This is Port # 4 in the configuration s/w.
