GMOS-LAN-01
4
CONNECTIONS TO BE MADE ON THE 14 PIN HARNESS:
1.
Connect the
red
wire to the ignition/accessory wire of the aftermarket radio.
2.
Connect the
Orange
wire to the illumination wire of the aftermarket radio. If the aftermarket radio
has no illumination wire just tape off the
orange
wire.
3.
Connect the
blue/white
wire to the amp turn on wire of the aftermarket radio and to the
blue/white
wire in
the 24 pin harness.
4. White
NOT USED
5. White/black
NOT USED
6. Gray
NOT USED
7. Gray/black
NOT USED
8.
Connect the
Brown
wire to the mute wire of the aftermarket radio. If the after market radio does not have a
Mute wire, tape up the
Brown
wire.
The following wires on the 14 pin harness are for the aftermarket radios that have navigation built in:
1.
Connect the
Green
wire to the parking brake wire of the aftermarket navigation radio.
The following wires on the 14 pin harness are for the aftermarket radios that have navigation built in:
2.
Connect the
Blue/Pink
wire to the VSS or speed sense wire of the aftermarket navigation radio.
3.
Connect the
Green/Purple
wire to the reverse wire of the aftermarket navigation radio.
When completed, plug the 14 pin harness into the GMOS-LAN-01.
CONNECTIONS TO BE MADE ON THE 30 PIN GM HARNESS:
1.
Connect the
green
wire to the amplifier’s left rear positive speaker output.
2.
Connect the the
green/black
wire to the amplifier’s left rear negative speaker output.
3.
Connect the
purple
wire to the amplifier’s right rear positive speaker output.
4.
Connect the
purple/black
wire to the amplifier’s right rear negative speaker output.
5.
Cut the
white
wire about half way between the two plugs. Connect the
white
wire from the 24 pin plug to
amplifier’s left front positive speaker output wire. Connect the
white
wire from the 12 pin plug to the positive
speaker wire of the Metra SP-2003 or equivalent.
6.
Cut the
white/black
wire about half way between the two plugs. Connect the
white/black
wire from the 24
pin plug to amplifier’s left front negative speaker output wire. Connect the
white/black
wire from the 12 pin
plug to the negative speaker wire of the Metra SP-2003 or equivalent.
FOR AFTERMARKET RADIO AND AMPLIFIER
(See wiring diagram on page 6)
