background image

K

NOWLEDGE IS 

P

OWER

E

nhance your installation and fabrication skills by 

enrolling in the most recognized and respected 
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 
800-354-6782 for more information and take steps 
toward a better tomorrow.

®

Metra recommends MECP 
certified technicians

IMPORTANT

If you are having difficulties with the installation of this product, 
please call our Tech Support line at 1-800-253-TECH. Before doing 
so, look over the instructions a second time, and make sure the 
installation was performed exactly as the instructions are stated. 
Please have the vehicle apart and ready to perform troubleshooting 
steps before calling.

axxessinterface.com 

© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION 

REV. 6/20/17 INSTCHTO-02

I N S TA L L AT I O N   I N S T R U C T I O N S

CHTO-02

Summary of Contents for CHTO-02

Page 1: ...n harness to 22 pin Chrysler harness with stripped leads TOOLS REQUIRED Cutting tool Crimping tool Tape Connectors example butt connectors bell caps etc TABLE OF CONTENTS Connections to be made 2 Installing the CHTO 02 3 Testing the CHTO 02 3 Chrysler Dodge amplified data interface 2002 2008 APPLICATIONS Provides accessory 12 volt 10 amp Retains R A P retained accessory power Used in amplified syste...

Page 2: ...ff the Brown wire The following 3 wires are for aftermarket multimedia navigation radios that provide these wires if not required tape them off and disregard them Connect the Light Green wire to the parking brake wire if applicable Connect the Blue Pink wire to the speed sense wire if applicable Connect the Green Purple wire to the reverse wire if applicable Plug the 16 pin harness into the CHTO 0...

Page 3: ...tive battery terminal Cycle the key by turning the ignition on for 30 seconds Then off and on again to test the radio Turn the ignition on if not already and then turn the radio on to verify that the radio works Check balance and fader controls for proper operation To adjust the overall volume of your audio system rotate the potentiometer which is located on the 16 pin side of the interface clockw...

Page 4: ...certified technicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform troubleshooting steps before calling axxessinterface com ...

Reviews: