Axxess AXSWC, Installation Instructions Manual, Page: 6 / 16

AXSWC
Dual Assignment (long button press)
REV. 2/17/20 © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
The
AXSWC
interface has the capability to assign (2) functions to a single button except for
Volume Up
and
Volume Down
, after the interface has been programmed and is fully functional.
This feature can be performed by either following the steps below, through a Windows based computer using the
Axxess Updater
, or through the
Axxess Updater
app available from the
Android/Apple mobile devices app store.
Notes:
a)
Seek Up
and
Seek Down
come pre-programmed as
Preset Up
and
Preset Down
for a long button press.
b) Apple mobile devices will require the use of the
AXHUB-1
for this feature.
Attention!
If more than 10 seconds elapses between steps, the procedure will abort, and the light in the interface will go out. The interface may not function properly and may need to
be reset and reprogrammed.
1.
Program the interface to the vehicle following the vehicle specific document.
2. Turn the radio off.
3. Cycle the key off, then back on.
4. Wait until the light flashes
Green
1 time then goes out.
5.
Press and hold the desired SWC button for dual assignment for 10 seconds (or until the light flashes rapidly
Green
), then release. The light will turn solid
Green
indicating the
interface is in
Dual Assignment
mode.
6. Reference the Dual Assignment Legend . Press and release the Volume Up button on the steering wheel the number of times related to the desired feature for a long button press.
7. Press and release the SWC button from step 5. The light will go out indicating the information has been stored to memory.
8. Repeat from step 5 to select another SWC button for dual assignment.
9.
To reset an SWC button back to its default state, repeat steps 3 and 4, then press and release the
Volume Down
button on the steering wheel. The light will go out, and the dual
assignment feature for that button will be erased.
Dual Assignment Legend
Function # Function
1 Volume Up *
2 Volume Down *
3 Seek Up / Next
4 Seek Down / Previous
5 Mode / Source
6 ATT / Mute
7 Preset Up
8 Preset Down
9 Power
Function # Function
10 Band
11 Play / Enter
12 PTT
13 On Hook
14 Off Hook
15 Fan Up *
16 Fan Down *
17 Temp Up *
18 Temp Down *
* Not applicable in this application