7
REV. 6/18/21
INSTAXPIO-JT1
Unplug the pink camera cable and set aside. For
this install the pink cable will not be used so iBEAM
suggests ziptieing the cable back so there is no
rattle in the tailgate.
Remove the retention clip around the camera. Slide
in the direction of the arrow and set aside, this
will be needed this later when installing the new
camera.
There is a clip below the area highlighted in Figure
B. Press that clip in and slide the camera out
towards the front side of the tailgate.
CAMERA REMOVAL
(CONT)
(Figure A)
(Figure B)
