4
ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM
SU
B
Factory Radio
Factory Radio Harness
Interface
Cut the male
connector off and
connect speaker
wires to amp
White
/ Front Left +
White/Black
/ Front Left -
Gray
/ Front Right +
Gray/Black
Front Right -
Green
/ Rear Left +
Green/Black
/ Rear Left -
Purple
/ Rear Right +
Purple/Black
/ Rear Right -
Any remaining wires
tape off and disregard
Vehicle T-Harness
Bass Knob
Blue/White
- Amp Turn-On Wire
Unplug connector
Any remaining wires
tape off and disregard
Black
- Ground
Orange
- Control
An SPDT relay, Metra part number
E-123
, is required if the amp turn-on
current of all amps exceeds 1-amp.
RCA Jacks
(sold separately)
Assignable Outputs Labeled CH 6-10
Interface Harness