9
REV. 7/30/2020 INSTAXDSPX-FD1
MOBILE APP
(CONT.)
Crossover Adjust
• If installing a subwoofer, the front and rear outputs will default to a 100Hz high pass filter to keep the low frequency signals out. If
a subwoofer is not being installed, change the front and rear crossover points down to 20Hz for a full range signal, or to the lowest
frequency the speakers will play down to.
• Selecting
High Pass
and
Low Pass
will provide one crossover frequency adjustment. Selecting
Band Pass
will provide two crossover
frequency adjustments, one for low pass, and one for high pass.
Continued on the next page
