4
BLUETOOTH STREAMING INTERFACE
16-pin Header
16-pin Header
AX-DSPL-BT
AX-DSPL-SP
AX-DSPL-BT
AX-DSPL-SP
• The
AXDSPL-BT
Bluetooth streaming interface can be used to stream media directly to
the interface.
• While streaming media the volume on the phone will be used. As an option, the
AXBK-1
(sold separately) can be used to control the volume.
1.
Important!
Unplug the interface from the vehicle.
2.
Remove (4) Phillips screws securing the interface, then remove the top cover, exposing
the circuit board within.
3.
Locate the 16-pin header on the circuit board.
4.
Important!
Referencing how the
AXDSPL-BT
is laid out in the picture, carefully line up
the header pins to the interface. Gently press down to secure.
Note:
Both interfaces may be damaged if installed wrong.
5.
Reinstall the top cover to complete the installation.
AXBK-1 Installation:
6.
Connect the
Brown
wire from the interface to the
Orange
wire from the
AXBK-1
.
Ground the
Black
wire from the
AXBK-1
.
Continued on the next page
