4
CONFIGURATION
(CONT.)
Video trigger legend
• Disable (will turn off the input)
• Backup Camera (dedicated backup camera)
• Left Blinker (will be used for activation)
• Right Blinker (will be used for activation)
• Control 1 (positive trigger activation)
• Control 1 (negative trigger activation)
• Control 2 (positive trigger activation)
• Control 2 (negative trigger activation)
• Control 3 (positive trigger activation)
• Control 3 (negative trigger activation)
• Control 4 (positive trigger activation)
• Control 4 (negative trigger activation)
• Auto (Reverse -> Drive) will activate once
that sequence is seen (only available for
video trigger 4)
Video trigger description
•
Reverse camera:
Dedicated by default to Video Trigger 1. Will activate the backup camera
while the vehicle is in reverse.
•
Left blinker:
Activation of the left turn signal will activate the left camera.
•
Right blinker:
Activation of the right turn signal will activate the right camera.
•
Auto (reverse -> drive):
Available only for Video Trigger 4, when installing a front camera. With
this feature selected, the camera will activate automatically once a reverse-then-drive sequence
is seen from the vehicle. Example of this scenario would be while parallel parking the vehicle. As
an alternative, a control wire can be used instead to manually activate the camera
.
Note:
Auto (Reverse -> Drive) will disable the camera once 15 MPH is reached. A control wire
activated will also disable the camera.
Note:
If the control wire is activated while driving, the camera will activate and deactivate
during stop-and-go traffic.
•
Control 1-4 (positive or negative) trigger activation wires:
Can be used as a positive or
negative trigger to manually activate a camera via a toggle switch, or similar device.
